TheHit-Pro
Easy to clean | Quick to use | Portable
Black · HG-HP-BK
Specifications
- Material
- 6061-T6 aluminum body, middle section, plunger and mouthpiece; return spring
- Finish
- Bead-blasted and anodized, black
- Dimensions
- Ø 11 mm × 83.7 mm
- Weight
- 11.08 g (without filter)
- Package size
- 86 × 21 × 21 mm (paper box)
- Weight with package
- 14.8 g
- Filter
- Replaceable activated-carbon tip, 7 mm (6 mm compatible)
- Clearing
- Spring-loaded push plunger
- Origin
- Taiwan
- In the box
- Hit-Pro ×1 (filter not included)
Easy to clean
Press to clean, fast.
The aluminum inner tube is the bowl itself. Press, and the spent material is pushed straight out; the spring resets it. For a deep clean, the grooves on the button's rim give you grip: pinch, twist, and the whole inner tube unscrews, then screws straight back in.
Quick to use
Unscrew, swap the filter, go.
The mouthpiece unscrews to take any standard 7 mm activated-carbon tip, which cools the draw and traps tar and particulates.
Portable
Pocket-sized, and it stays put.
At Ø 11 × 83.7 mm it is shorter than a pen and disappears into a pocket or pencil case. The bead-blasted finish stays dry and sure in the hand, and the anti-roll bump keeps it where you set it down, not on the floor.
Packaging
One piece, one box.
Every Hit-Pro comes in a grey paper box, 86 × 21 × 21 mm, printed with a line drawing of the piece. At 14.8 g with packaging, it sits as neatly on a shelf as in a bag.
Filter guide
Pick the filter for how you like it.
Hit-Pro takes a standard 7 mm activated-carbon tip, sold separately. Both common sizes fit; here's how they differ.
- Filtration
- Flavor
- Throat hit
Close to full 8 mm filtration with a smoother, gentler draw. The size most people settle on.
Why it's different
Hit-Pro vs. the usual metal one-hitter
| Hit-Pro | Typical metal one-hitter | |
|---|---|---|
| Clearing | Push-button plunger | Tap or poke with a tool |
| Filtration | Replaceable activated carbon | None, or a fixed screen |
| Material | Machined 6061-T6 aluminum, anodized | Brass tube or painted steel |
| Rolls off the table | No. Anti-roll bump | Yes |
| Serviceable | Fully disassembles, all parts replaceable | Sealed or crimped |
| Made in | Taiwan | Unspecified |
Questions
How do I clean it?+
Grip the grooved silver button and unscrew the inner tube, then unscrew the middle section and the knurled mouthpiece. Soak the metal parts in isopropyl alcohol, rinse, dry, reassemble. Replace the carbon filter whenever the draw tightens.
Which filters fit?+
Any standard 7 mm activated-carbon filter tip. 6 mm tips also fit with a slightly looser hold. 8 mm does not fit.
Does the anodizing wear?+
Anodizing is an oxide layer grown from the aluminum itself, not a coating on top of it. It will pick up the patina of daily carry but won't flake or chip.
Where can I buy one?+
We're onboarding retailers and distributors now. See the Wholesale page if you're a business, or contact us to be notified when Hit-Pro is available near you.